Gardner Lab

Psychology Department

Neurosciences Institute

Stanford University


日本語   

Differences

This shows you the differences between the selected revision and the current version of the page.

eyetracker_setup 2017/05/10 05:05 current
Line 1: Line 1:
 +======  Eyetracker Setup Instructions ======
 +
 +1. Connect the projector cable into Oban
 +
 +2. Turn on Oban
 +
 +3. Check that DB9 cable is connected.
 +
 +4. Connect trigger cable.
 +
 +5. Turn on projector.
 +
 +==== Scanner Bed ====
 +1. Screw in mirror
 +
 +2. Add projection screen
 +
 +3. Clamp in IR light and put in position
 +
 +4. Turn on IR light by pressing control room button
 +
 +Make sure eyetracker computer is on.
 +
 +==== Eyelink screen ====
 +To switch scanner screen to eyelink
 +
 +1. flip switch to 1
 +
 +2.Change from GE screen to Eye linnk
 +
 +
 +==== Eyetracker Setup ====
 +
 +1. Adjust the top mirror so you can see the eye
 +
 +2. Adjust the focus so you cna see the eye
 +
 +3. Adjust the IR light source so the reflective spot is outside the pupil.
 +
 +  - Might help to do this before sending bed into scanner from the farther mount hold