This shows you the differences between two versions of the page.
mgl:functionreferencedigio [2014/05/28 19:50] |
mgl:functionreferencedigio [2014/05/29 00:14] |
||
---|---|---|---|
Line 20: | Line 20: | ||
-Download [[http://www.ni.com/download/ni-daqmx-base-3.7/4272/en/|NI-DAQmx Base]]. You should use the latest version, as of this writing 3.7.0. You may need to make a free account with NI. | -Download [[http://www.ni.com/download/ni-daqmx-base-3.7/4272/en/|NI-DAQmx Base]]. You should use the latest version, as of this writing 3.7.0. You may need to make a free account with NI. | ||
-Make sure that the device (e.g. NI USB-6501 or NI USB-6211) has up-to-date firmware, by running FWUpdate (included in Ni-DAQmx Base/bin) | -Make sure that the device (e.g. NI USB-6501 or NI USB-6211) has up-to-date firmware, by running FWUpdate (included in Ni-DAQmx Base/bin) | ||
- | -Restart matlab if you have already run readDigPort (the program has to reinit the driver) | + | -Restart matlab if you have already run readDigPort (the program has to reinit the driver). Also, note that it is best to run matlab without the desktop (matlab -nodesktop) so that you can see all the console messages described below. |
-Documentation is installed and should be available from the following location<code> | -Documentation is installed and should be available from the following location<code> | ||
file:///Applications/National%20Instruments/NI-DAQmx%20Base/documentation/docsource/daqmxbasecfuncindex.htm | file:///Applications/National%20Instruments/NI-DAQmx%20Base/documentation/docsource/daqmxbasecfuncindex.htm |