This shows you the differences between two versions of the page.
mgl:taskreferencehowtos [2014/11/07 13:58] |
mgl:taskreferencehowtos [2015/01/21 15:31] |
||
---|---|---|---|
Line 196: | Line 196: | ||
You can use a National Instruments card for digital I/O with mgl by doing the following: | You can use a National Instruments card for digital I/O with mgl by doing the following: | ||
- | -Download [[http://joule.ni.com/nidu/cds/fn/p/sn/n23:3478.41.181.5994/lang/en|NI-DAQmx Base]]. You may need to make a free account with NI. | + | -Download [[http://www.ni.com/download/ni-daqmx-base-3.7/4272/en/|NI-DAQmx Base]]. You may need to make a free account with NI. |
-Make sure that the device (NI USB-6501) has up-to-date firmware, by running FWUpdate (included in Ni-DAQmx Base/bin) | -Make sure that the device (NI USB-6501) has up-to-date firmware, by running FWUpdate (included in Ni-DAQmx Base/bin) | ||
-Restart matlab if you have already run readDigPort (the program has to reinit the driver) | -Restart matlab if you have already run readDigPort (the program has to reinit the driver) |