1. Connect the projector cable into Oban

2. Turn on Oban

3. Check that DB9 cable is connected.

4. Connect trigger cable.

5. Turn on projector.

1. Screw in mirror

2. Add projection screen

3. Clamp in IR light and put in position

4. Turn on IR light by pressing control room button

Make sure eyetracker computer is on.

To switch scanner screen to eyelink

1. flip switch to 1

2.Change from GE screen to Eye linnk

1. Adjust the top mirror so you can see the eye

2. Adjust the focus so you cna see the eye

3. Adjust the IR light source so the reflective spot is outside the pupil.

1. Might help to do this before sending bed into scanner from the farther mount hold